Asmodus Products

The Minikin Boost has the shape of the original Minikin but comes with new features such as an enlarged asMODus logo on the door of the device, a magnetic battery door, a maximum firing range of 155 watts, and the best feature of all, the new "Curve" firing mode.

For those of you that have never heard of the "Curve" function, it allows the Minikin boost to manually set 5 different wattages over time presets for up to 10 seconds so it can emulate temperature control but to your specifications. For example, you can have the device start off at 55.0 watts for 0.5 seconds, peak at 70.0 watts for 3 seconds, then finish off at 35.0 watts for 1 second. This allows you to control how fast and how high you want your device to ramp up when using Claptons or large gauge wire builds every time.

Product Specifications:

• Needs 2x 18650 sized batteries (not included)
• Power Mode output range: 5.0 watts - 155.0 watts
• Temperature Control Mode output range: 5.0 watts - 120.0 watts
• Temperature range: 212'F - 572'F / 100'C - 300'C
• Atomizer Resistance range: 0.1 ohm - 2.5 ohm
• Firing Modes: Power, Temp Ni200, Temp SS316, Temp SS317, Temp SS304, Temp Ti, TCR, TFR, and Curve.
• Maximum Output Voltage: 7.5 Volts
• Maximum Output Current: 3.5 Amps
• Micro USB Port for future firmware updates and charging.
• The overall size of the Minikin has been increased so Atomizers up to 25mm can be used with no overhang.

The Minikin is back the all new Minikin 2! The Minikin 2 is powered by a GX-180-HT chip which incorporates the same battery power saving capabilities as its predecessors but features a new wattage cap of 180 watts and touch screen support!

The Minikin 2 utilizes newly updated firmware which displays the following information on its LED screen: Individual battery charge, resistance of the atomizers, volts being used to fire at desired wattage, a puff counter, the duration of the fire, and which mode you are in.

The Minikin 2 features a redesigned body that was designed to be exceptionally comfortable to hold. The asMODus logo has been re-positioned to the back of the device and the USB port has been moved the front of the device as the battery door has been remodeled to add magnetic closure. 15 vent holes have been added to the base of the device which allows for maximized heat dissipation.

Technical Specifications:

• Requires two 18650 sized batteries
• Touch screen type: Capacitive screen
• Wattage range: 5.0 - 180.0W
• Wattage range (TC Mode): 5.0 - 120.0W
• Atomizer ohm range: 0.1 - 2.5 ohm
• Max output voltage: 7.5V
• Peek output current: 45A
• Temperature control range: 212° - 572°F / 100°C - 300°C
• Charging parameters: DC 5V/1A
• Upgradeable system

The Asmodus Luna is constructed from 6063 aluminum alloy and then covered in stabilized wood. The Ultroner Luna is a single-battery, unregulated Squonk mod that packs a punch while boasting an aesthetically pleasing design. asMODus is laser engraved into the firing button which has as responsive, click button. The Luna is unregulated, so you cannot control the output power (meaning you cannot set a wattage) and it will use the full power of the battery up to a maximum of 80.0w watts until the battery drops too low to use. While being unregulated the mod offers multiple built in safety features as well as an LED indicator light to keep you updated with just a glance.

The Ultroner x Asmodus Luna Squonker Box mod is easily turned on and off; simply click the fire button 5 times and the LED will flash blue. The Luna has a protection chip inside that guards the user from a wide variety of potentially volatile safety issues.

Includes:

• 1x Ultroner X Asmodus Luna Squonker Box Mod
• 1x Luna Squonk Bottle (Pre-Installed)
• 1x Luna Squonk Bottle (Spare)

 The Galatek RDA is a low profile 24mm rebuildable dripping atomizer that features a unique design. The top cap is designed to maximize heat dissipation while intensifying flavor. The cap is composed of 2 parts: a curved top piece to maximize flavor and a sleeve with 4 large holes which vent out heat during use. The build deck on the Galatek presents itself in a 2 post style which was designed to be easy to build on and post holes measure in at 2mm. 

Product Specifications:

• Diameter: 24mm
• Height: 29mm (including drip tip)
• Constructed from high quality 304 Stainless steel
• PEEK insulators
• Two graveyard posts with 2mm post holes
• Removable 810 wide bore drip tip
• Adjustable bottom airflow inlets

Spare parts:

• Alan key tool
• 2 Fused clapton coils (2x26|40g NI80)
• 2 replacement grub nuts
• Replacement O- rings
• Squonk Pin

The Bubba drip tip adds an attractive and unique touch to tanks!
These drip tips are shorter and more glossy than the regular Stumpy drip tips.
Add the Bubba drip tip to your tank to fully complete your set-up today! 

 These drip tips are compatible with the following tanks:

• Smok TFV8 Tank
• Smok TFV8 Big Baby Tank
• 528 Custom Vape Goon RDA
• 528 Custom Vape Goon LP RDA
• Kennedy RDA
• Avocado RTA
• TFV12 Tank
• Griffin RTA
• Eagle

The Bubba drip tip adds an attractive and unique touch to tanks!
These drip tips are shorter and more glossy than the regular Stumpy drip tips.
Add the Bubba drip tip to your tank to fully complete your set-up today! 

 These drip tips are compatible with the following tanks:

• Smok TFV8 Tank
• Smok TFV8 Big Baby Tank
• 528 Custom Vape Goon RDA
• 528 Custom Vape Goon LP RDA
• Kennedy RDA